Description
Please fill out the order notes section (personalization) with the information you would like for your decal.
Email QR code at gpnyinc [!at] gmail.com
For logos charges are separate
-We will send proof for your approval before we print your order.
Please let us know In personalization or message if you’d like the decal to go inside the glass as it will need to be reverse cut.
The decal will be cut to be placed on the outside of the glass unless otherwise stated to us.
Application Steps: (Professional Installation Recommended)
—–Clean the application surface with soap and water or rubbing alcohol (70% isopropyl alcohol). The area must be dry before application.
——Squeegee the decal on a flat surface to ensure it is stuck to the transfer tape and ready for installation.
—–Hold up the decal to the desired location. Then put a piece of masking tape down the middle of the decal. The tape should start above the decal and go all the way down through the center and below the decal.
—–The masking tape will be used as a hinge for installation. Carefully peel back the transfer tape with the decal on it from one side of the decal left or right. Hold the transfer tape back while you tear or cut away the backing paper.
—–Carefully lay the transfer tape back down to your application surface starting from the center and applying out-words using light pressure with your squeegee from middle to outside.
—– Remove the masking tape. Repeat steps 4 and 5 for the other side of your decal completely removing the backing paper with this final side. Then firmly squeegee your entire decal from the middle to the edge.
—–Now that your decal is installed with the transfer tape still on top. Slowly peel back the transfer tape from a corner of your decal holding the transfer tape as flat and low as possible for the easiest application.
—–Enjoy your perfectly applied background-less decal for a clean professional appearance.
Professional installation is recommended. Thank you!
Reviews
There are no reviews yet.